SATA demand–Taiwan connector manufacturing company

Author：danny / time：2019-08-26 / The number of clicks：680

Traditional  Taiwan connector manufacturing company’s interface technique has a trend of leaning towards SATA connector.  The reason behind this is our growing demand of higher functionality. It’s a basic demand of users of connectors.  We could see that people hold hope on connectors from the growing need of higher functionality. Increasing functionality means higher transmission speed, and there’s another way to achieve that, by increasing the speed of parallel interface which may lead to more serious interference between products. And you could see that the trend nowadays is heading towards the right direction. Since SATA connectors could use differential signals, it could ease signal interference. With merits of faster transmission speed, SATA connectors can provide a more complete signal with lower signal voltage, which makes the transmission process easier to achieve. Also, better air flow in SATA connector components reduces the use of pin accordingly.

So, from a market demand point of view, SATA connectors provided by a Taiwan connector manufacturing company has a very big potential. SATA also benefits PC manufacturers a lot by replacing the 2-inch strip cable with a 0.25 one and reduce the pin numbers from 80 to 7. These mean that the volume of the connector has been reduced significantly which means better air flow, and it’s good for heat dissipation. We all know that over-heating would affect the functionality and is dangerous. In many fields, manufacturers have taken the heat produced during the process as a must-solve technical problem. Having better air flow is a factor for SATA connector’s popularity.