Application of Rj45-Asia connector suppliers

Author：Danny / time：2019-09-23 / The number of clicks：805

The Rj45 connector is known to most people as Registered Jack. It is a see-through plug on the internet or phone line cable. It’s one of essential electronic products which provided by Asia connector supplier. Both ends of the twisted pair need to be installed with the Rj45 connector to connect the internet card, hub, and switchboard. In addition to its application in electronic and internet communications, most people don’t know it can be applied in the industrial field as well. It’s one of the important features.

It’s quite a challenge in production and manufacturing Rj45 connector for the industrial field. There are many types of Rj45 connector products in the market, but the quality demand is very strict when it is applied in the industrial field. It has to be sealed and water proof without losing the signal.

In the modern industrial production, the production environment is tough due to the processing machine and manufacturing principle. There might be large amounts of heat, dust, moisture, corrosive liquid, and vibration. These affect the use life of the components in the factory, as well as the connector. A good quality connector can provide a more stabilized connection without delaying the signal which could cause trouble to the production. Therefore, Asia connector manufacturer and Asia connector supplier of Rj45 connectors are dedicated to developing a connector that is suitable for industrial production. Not only is it water-proof and dust-proof, but also meets the following industrial demands:

(1) Fast transmission speed. Production efficiency is critical for industrial production. Data transmission is one of the important links for efficiency and more production volume. That’s a technology the manufacturer could work on.

(2) Good mask function. It’s not just about being water-proof and dust-proof, but also being a protection from outside signal interference and noise. There is many electronic equipment in the factory, therefore signal interference can be a serious problem. To ensure a more stabilized transmission, it has to reduce the interference. In addition, noise is an important factor that affects signal stabilization in a noisy factory. Hence, the manufacturer can make improvements from these factors.

(3) Details in good product design. The size of the equipment for industrial production are relatively big, but every detail matter, even just a small screw. Asia connector supplier and manufacturer need to look into the details. For example, to avoid inserting in the wrong direction, there has to be a fool-proof latch; to use a safety lock, there has to be a screw nut; to make it available for every end surface, it has to be able to wire; there has to be a ground wire on the outer board to connect it on the outer case of the connector.